3D Printing
Everything related to 3D printing including designing, upgrades, and builds.
Table of contents
- Printing a City - My journey to printing a city
- Upgrading the 3D Printer - Upgrading Voxelab Aquilla with tubing, bed springs, and extruder
- 3D Printing Toronto - Printing and framing most of downtown Toronto
- Flashing Aquila Firmware - Flashing Marlin Firmware onto Voxelab Aquila
- Satsana Fan Shroud - Printing and mounting a replacement fan shroud
- Trianglelab 3D Touch - Installing and setting up 3D Touch (Similar to BL Touch)
- Creating Toronto STL Files - Tutorial on creating the STL Models of Toronto
- Adding PEI and Ferrules - Adding a PEI sheet and ferrules to 3D Printer
- Klipper and FluiddPI - Installing Klipper onto a Pi Zero 2 W
- BMG Extruder - Replacing my extruder with a BMG Clone
- Kingroon KP3S - Setting up the Kingroon KP3S
- kiauh - Setting up kiuah
- Input Shaper - Working with Input Shaper
- Voron v0.1 Hardware - Building my Voron V0.1 - Intial hardware build
- Voron v0.1 Software - Building my Voron V0.1 - Software and finishing touches
- Kirigami Bed - Replacing bed mount with Kirigami Bed
- Umbilical Mod - Replacing toolhead wires with Umbilical cable
- V0.2 Skirts - Upgrading to V0.2 Skirts
- Nevermore Micro - Nevermore Activated Carbon Filter
- Mini-AfterSherpa - Fixing Voron Hotend after Failure
- ZeroPanels - Installing ZeroPanels
- Voron V0.2 r1 - Building another V0
- Voron Switchwire Conversion - Converting Aquila to a Voron Switchwire